Holes, cavities, cracks, connections, joints, etc. represent the current scope of the wide range of Azichem sealants.
The range of “traditional” sealants, of the single-component hygro-hardening type, includes PROTECH FLEX for any type of deformable seal and on any type of support and PROTECH SIGILFLEX MONO specific for sealing expansion joints in industrial flooring and concrete products in general. EG 91 is a two-component elastoplastic sealant, thixotropic, for joints and cavities subjected to high stress, ideal for waterproofing work under the water table.

 

 

PROTECH FLEX

A single-component, moisture-curing and fast-hardening polyurethane sealant with a medium-to-high modulus of elasticity, remaining permanently elastic yet with high surface hardness and being tear- and weather-resistance and paintable. Ideal for the deformable sealing of expansion joints on terraces and balconies, for filling joints on prefabricated walls and on wooden, steel, aluminium, copper and plastic materials along with plasters and so on.

PROTECH FLEX

A single-component, moisture-curing and fast-hardening polyurethane sealant with a medium-to-high modulus of elasticity, remaining permanently elastic yet with high surface hardness and being tear- and weather-resistance and paintable. Ideal for the deformable sealing of expansion joints on terraces and balconies, for filling joints on prefabricated walls and on wooden, steel, aluminium, copper and plastic materials along with plasters and so on.

Technical Data Sheet

Safety data sheet

 

 

EG 91

Epoxy-polyurethane two-component elastoplastic and thixotropic sealant, for joints subject to traffic, where Shore A Hardness Scale = 65. The elongation-at-break is 70%. To be applied with a trowel or extruded into the suitably-taped sections of the joint (to protect adjacent surfaces). Resistant to contact with hydrocarbons (gasoline and diesel fuel).

EG 91

Epoxy-polyurethane two-component elastoplastic and thixotropic sealant, for joints subject to traffic, where Shore A Hardness Scale = 65. The elongation-at-break is 70%. To be applied with a trowel or extruded into the suitably-taped sections of the joint (to protect adjacent surfaces). Resistant to contact with hydrocarbons (gasoline and diesel fuel).

Technical Data Sheet

Safety data sheet A

Safety data sheet B